Page 27 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
6.3 Viasis settings and parameter sets
The most often used set-
tings can be made after a
click on the
Settings
button
in the viagraph connection
window (see illustration 11)
in the tabs
General
,
Sym-
bols
and
Switches
of the
Settings window, see illus-
tration 41.
Following description is
based on the direct menu
input, which is possible with
any ASCII terminal or ter-
minal program, or also in
viagraph terminal window.
As information the input
windows of viagraph are
shown at the respective
menu descriptions.
While inputs in the menu
system are made directly to
the viasis, changes to the actual parameters shown in the viagraph input windows are cached in
the program and need to be transferred to the viasis by clicking the
Transfer
button, otherwise
the changes are discarded.
Hint: To avoid a malfunction of viagraph take care that the viagraph terminal window
shows the viasis main menu before you click to the „Settings“, „Matrix“, etc. button!
The viasis 3003 main menu appears after a click to the „Connect to device“ button in viagraph
automatically. If you use other terminal software, it depends on the used communication inter-
face (RS232, USB, Bluetooth, GSM) whether the main menu appears or not. If the systems
are connected and the main menu is not shown, press the „Shift“ and the „H“ key together, so
the menu will be send.
If you insert one of the selection numbers 1 till 6 in the viasis main menu, displayed in the ter-
minal window (see illustration 11) the related sub menu will be send by the viasis.
Main menu:
1. Transmit stored data
2. Online measurement
3. Test functions
4. Settings
5. Radio modems
6. Information and time
Your choice 1...6?
Illustration 41: Viagraph settings window
