Page 48 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
warding transport of the viasis E-mail to the final destination mail server of the recipient E-mail
account(s), which you have to enter in “
5. Configure Email
” (see next chapter) of the
GSM/Email menu.
Note: The use of our SMTP-server takes place on own danger and under exclusion of
any liability on the part of the via traffic controlling GmbH.
If you answer “
y
” to the question “
Change (y/n)?
” you will be prompted for each SMTP-
server setup entry. For valid inputs in the text fields see the insertion of APN, USER and
PASS in the previous chapter.
The input fields in detail:
SMTP-Server –
name of a mail server which is ready to receive E-mails delivered by the
viasis. The mail server only forwards (relays) emails to the recipient(s). Alternatively to the
URL name the IP address (e. g. 192.86.102.245) of a SMTP server can also be inserted.
SMTP-Port
– Up to 5 digit long port number (1...65535), at which the mail server listens to
mail delivery attempts. Typically mail servers listen at port 25, but this may differ for single
SMTP servers.
EHOST
– Host name of the E-mail sender
EUSER
– Senders user name of its E-mail account at the mail server. In common the E-mail
sender owns a user mail account at the providers mail server. Nowadays rarely exist also open
mail (relay) server forwarding each mail they get from whoever, with no authorized login
needed or allowed. If you use such an open relay server delete user name EUSER and pass-
word EPASS.
EPASS
– Password of the above described user E-mail account. For the authentication of the
mail sender needed password for the login as user at the mail server. For open relay server the
password shall be deleted, see above. In order to avoid misuse by unauthorized third persons
the set EPASS password is output as a “******” string only.
MAILFROM
– E-mail address of the mail sender
A configuration change of the SMTP-server access data can be done by all serial interface con-
nections (RS232, GSM, Bluetooth or USB) of the viasis. But only if you are connected by
RS232 directly the access to the SMTP-Server and if he is ready to receive E-mails from the
viasis is tested and a protocol send to a connected terminal (example):
C
onfigure ...
AT+QILOCIP
+IP: 100.69.8.51
AT+QIDNSIP=1
AT+QIOPEN="TCP","smtp.viaxmail.de",25
CONNECT
220 mx01.viaxmail.de ESMTP Postfix
EHLO viaxmail.de
250-mx01.viaxmail.de
AUTH LOGIN
334 VXNlcm5hbWU6
1
URL – “Uniform Resource Locator” – unique resource name, simplified e. g. the name of a website or host in
the internet. URL names are translated by DNS (domain name system) servers in routable IP addresses.
