Page 40 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
For LED fixed texts (PLUS SMILE) the displayed text or a symbol name will be used to label
the menu items, for LED full matrices with variable texts and symbols the menu items are la-
beled only as numbered LED page (1, 2, ... etc.).
For each text or symbol can be defined an „On“ and „Off“ threshold between 5 km/h and 200
km/h (threshold deactivated).
The text or the symbol is switched synchronous to the numeric speed display if the related
threshold is exceeded by the measured speed value. Moreover the switched outputs (relays, ...,
display pages) are also activated outside the range of the set minimal and maximal speed dis-
played thresholds for the numeric speed display, so that for example with the viasis PLUS
additional text like “Slow down” can be also shown without having a numeric speed displayed.
For viasis PLUS SMILE with LED fixed text the activation range of two or more
texts shall not overlap. The simultaneous display of two fixed texts will cause an
unreadable result.
The viasis PLUS shows in case of the simultaneous activation of two or more LED pages, the
pages in an alternating sequence each for the time of measurement cycle (typ. 1,5 s). This fea-
ture can be used e. g. in bi-lingual regions to show additional text in two languages in an
alternating manner. For example Led page 1 shows the text „THANK YOU“, Led Page 2
shows the welsh text „DIOLCH YN FAWR“, the „On“ threshold for both pages is set to 5
km/h and the „Off“ threshold to 30 km/h – as result for the time of detection of a 28 km/h driv-
ing vehicle the texts „THANK YOU“ and „DIOLCH YN FAWR“ are shown alternating each
for 1,5 seconds.
In viagraph
switched out-
puts are placed
in the tab
Switches
of the
parameter sets,
see illustration
46.
The viagraph
settings
Switch-
es
tab example
represents a
viasis PLUS
with 4 Led pag-
es, three relays
and a bicolor
LED warning
flash light (yel-
low/red LED).
Illustration 46: Viagraph settings tab switches
