Network Video Recorder User Manual
5.9 Configuring HDD Group for Recording and Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD
group.
Step 1 Enter HDD setting interface.
Menu>HDD
Figure 5-27 HDD
General Step 2 Select
Advanced
on the left side menu.
Figure 5-28 Storage Mode
Check whether the storage mode of the HDD is Group. If not, set it to Group. For
detailed information, please refer to
Chapter 14.4 Managing HDD Group.
Step 3 Select
General
in the left side menu
Step 4 Click
to enter editing interface.
Step 5 Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click
Apply
and then in the pop-up message box, click
Yes
to save your settings.
3) Click
OK
to back to the upper level menu.
4) Repeat the above steps to configure more HDD groups.
Step 6 Choose the Channels which you want to save the record files and captured
pictures in the HDD group.
1)
Select
Advanced
on the left bar.
2)
Choose Group number in the dropdown list of Record
on HDD Group
3)
Check the channels you want to save in this group.
4)
Click
Apply
to save settings.
After having configured the HDD groups, you can configure the Recording and Capture
settings following the procedure provided in
Chapter 5.2-5.7
.
Summary of Contents for VZ-NVR-161080-P
Page 1: ...NETWORK VIDEO RECORDER Quick Start Guide...
Page 115: ...Network Video Recorder User Manual Figure 6 19 Interface of External File Playback...
Page 145: ...Network Video Recorder User Manual Figure 8 18 Copy Settings of Alarm Output...
Page 214: ...Network Video Recorder User Manual Figure 13 26 View HDD Status 2...
