Vezco VZ-NVR-161080-P, Quick Start Manual

Page: 201 / 255

Network Video Recorder User Manual
Chapter 13 HDD Management
13.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your
NVR.
A message box pops up when the NVR starts up if there exits any uninitialized HDD.
Figure 13-1 Message Box of Uninitialized HDD
Click Yes button to initialize it immediately or you can perform the following steps to
initialize the HDD.
Step 2 Enter the HDD Information interface.
Menu > HDD> General
Figure 13-2 HDD Information
Interface Step 3 Select HDD to be initialized.
Step 4 Click the Init button.
Figure 13-3 Confirm Initialization