Vezco VZ-NVR-161080-P, Quick Start Manual

Page: 36 / 255

Network Video Recorder User Manual
Figure 2-14 Reset Password
Step 2 Select the GUID file from the U-flash disk and click Import to import the file to the
device.
If you have imported the wrong GUIE file for 7 times, you will be not allowed to reset the
password for 30 minutes.
Step 3 After the GUID file is successfully imported, enter the reset password interface to
set the new admin password. Refer to Chapter 2.1.2 Activating Your Device for
details.
Step 4 Click OK to set the new password. You can export the new GUID file to the U-flash
disk for future password resetting.
When the new password is set, the original GUID file will be invalid. The new GUID file
should be exported for future password resetting. You can also enter the User>User
Management interface to edit the admin user and export the GUID file.
2.2 Using Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2-15.