Vezco VZ-NVR-161080-P, Quick Start Manual

Page: 17 / 255

Network Video Recorder User Manual
1.2 IR Remote Control Operations
The NVR may also be controlled with the included IR remote control, shown in Figure 1-7.
Batteries (2×AAA) must be installed before operation.
The IR Remote is set at the factory to control the NVR (using default Device ID# 255)
without any additional steps. Device ID# 255 is the default universal device identification
number shared by the NVRs. You may also pair an IR Remote to a specific NVR by
changing the Device ID#, as follows:
Pairing (Enabling) the IR Remote to a Specific DVR (optional)
You can pair an IR Remote to a specific private DVR by creating a user-defined
Device ID#. This feature is useful when using multiple IR Remotes and DVRs.
On the DVR:
Step 1 Go to General > More Settings.
Step 2 Type a number (255 digits maximum) into the Device No. field.
Step 3 On the IR Remote:
Step 4 Press the DEV button.
Step 5 Use the Number buttons to enter the Device ID# that was entered into
the DVR. Step 6 Press Enter button to accept the new Device ID#.