Network Video Recorder User Manual
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen
: showing only one screen on the monitor.
•
Multi-screen:
showing multiple screens on the monitor simultaneously.
•
Auto-switch:
the screen is auto switched to the next one. And you must set the dwell
time for each screen on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording:
continuous record and motion detection record are supported.
•
Output Mode:
select the output mode to Standard, Bright, Gentle or Vivid.
•
Add IP Camera:
the shortcut to the IP camera management interface.
•
Playback:
playback the recorded videos for current day.
•
Aux Monitor:
the NVR checks the connection of the output interfaces to define the main
and auxiliary output interfaces. The priority level for the main and aux output is HDMI >
VGA
.
When both the HDMI and VGA are connected, the HDMI is used as main output and the
VGA is used as the aux output.
When the aux output is enabled, the main output cannot perform any operation, and you
can do some basic operation on the live view mode for the Aux output.
Summary of Contents for VZ-NVR-161080-P
Page 1: ...NETWORK VIDEO RECORDER Quick Start Guide...
Page 115: ...Network Video Recorder User Manual Figure 6 19 Interface of External File Playback...
Page 145: ...Network Video Recorder User Manual Figure 8 18 Copy Settings of Alarm Output...
Page 214: ...Network Video Recorder User Manual Figure 13 26 View HDD Status 2...
