Vezco VZ-NVR-161080-P, Quick Start Manual

Page: 68 / 255

Network Video Recorder User Manual
Figure 4-5 PTZ Settings
Step 2 Select patrol No. in the drop-down list of patrol.
Step 3 Click the Set button to add key points for the patrol.
Figure 4-6 Key point Configuration
Step 4 Configure key point parameters, such as the key point No., duration of staying for
one key point and speed of patrol. The key point is corresponding to the preset.
The
Key Point No. determines the order at which the PTZ will follow while cycling
through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move
from one key point to the next.
Step 5 Click the Add button to add the next key point to the patrol, or you can click the OK
button to save the key point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol,
or click the Clear All button to delete all the key pints for all patrols.
4.2.4 Calling Patrols
Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Step 1 Click the button PTZ in the lower-right corner of the PTZ setting interface;