Network Video Recorder User Manual
Figure 12-12 NTP Settings Interface
Step 3 Check the
Enable NTP
checkbox to enable this feature.
Step 4 Configure the following NTP settings:
Interval:
Time interval between the two synchronizing actions with NTP server. The
unit is minute.
NTP Server:
IP address of NTP server.
NTP Port:
Port of NTP server.
Step 5 Click the
Apply
button to save and exit the interface.
The time synchronization interval can be set from1 to 10080min, and the default value is
60min. If the NVR is connected to a public network, you should use a NTP server that has
a time synchronization function, such as the server at the National Time Center (IP
Address: 210.72.145.44). If the NVR is setup in a more customized network, NTP software
can be used to establish a NTP server used for time synchronization.
12.2.4
Configuring SNMP
Purpose:
You can use SNMP protocol to get device status and parameters related
information.
Step 1 Enter the Network Settings interface.
Menu >Configuration> Network
Step 2 Select the
SNMP
tab to enter the SNMP Settings interface, as shown in Figure 12-
13.
Figure 12-13 SNMP Settings Interface
Step 3 Check the
SNMP
checkbox to enable this feature.
Step 4 The enabling of SNMP may cause security problems. Click
Yes
to continue or
No
to
cancel the operation.
Summary of Contents for VZ-NVR-161080-P
Page 1: ...NETWORK VIDEO RECORDER Quick Start Guide...
Page 115: ...Network Video Recorder User Manual Figure 6 19 Interface of External File Playback...
Page 145: ...Network Video Recorder User Manual Figure 8 18 Copy Settings of Alarm Output...
Page 214: ...Network Video Recorder User Manual Figure 13 26 View HDD Status 2...
