VETRON 5000, Service Manual

Page: 52 / 118

2
1
A
3
50
05/2019
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
51
05/2019
VETRON 5000 - FLAT BED MACHINE - SERVICE MANUAL
DISPLAY STEP DESCRIPTION
» NEEDLE GUARD
NOTICE:
Adjustment steps 03.11., 03.12. and 03.13. must be completed before!
01
Activate the ADJUSTMENT WIZARD
(see 02.01. / Page 19).
02
» Until chapter
14
appears on the display.
03
4
t
N
e p u
e dl u rd g e e a 1
s
» Confirm.
INFO: The pedal is blocked. While
turning by hand the display shows the
machine position in degrees. Stitch
length is set to 0mm .
04 Turn the machine with the mechanical handwheel to the thread loop position.
05
Turn the screw
2
outwards until the needle guard
1
touches the needle 3 (position
A
).
06 » Confirm to proceed to the next step.
NOTE:
The needle guard should protect the needle from colliding with the hook point.
At
stitch length 0 and in thread loop position the needle guard should slightly touch the
needle, so it is slightly pushed aside during the passing of the hook point.
03. ADJUSTMENT
14. NEEDLE GUARD