System Application Guide
SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB
)
Revision BK, September 27, 2017
Page 17 of 75
List 127: Optional Internal Ground/Return Bar, 6-Panel Bay (Panel Length)
Features
♦
Replaces a Distribution Panel on the left and right side with a panel length internal
ground/return bar.
♦
Consists of two (2) ground/return bar assemblies and two (2) blank cover panels.
♦
For installation in top feed or bottom feed arrangements. When used in top feed
arrangements, ground bar assemblies are installed in top most left and right Distribution
Panel mounting positions (appropriate blank cover panels are also installed in these
positions). When used in bottom feed arrangements, ground bar assemblies are installed
in bottom most left and right Distribution Panel mounting positions (appropriate blank
cover panels are also installed in these positions).
♦
See
under
Wiring Illustrations
in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
only.
Ordering Notes
1)
Order as required. Order one (1) List 127 for a fully configured bay.
2)
Specify top feed or bottom feed to instruct the factory to mount the Internal Ground/Return Bars at the top or bottom of
the bay.
3)
Order load lugs as required per
Distribution Devices and Lug Selection
in ACCESSORY DESCRIPTIONS.
List 128: Blank Distributional Panel Cover, 6-Panel Bay
Features
♦
Covers an unused Distribution Panel position.
Restrictions
only.
Ordering Notes
1)
Order one (1) List 128 for each position in the bay that is NOT populated with a Distribution Panel.
List 130: Distribution Panel Paralleling Bar
Features
♦
Parallels two Distribution Panels mounted one above the other.
♦
Each List 130 includes two (2) Paralleling Bars (one per side).
Restrictions
Ordering Notes
1)
Order as required.
