SAG582120600
System Application Guide
Revision BK, September 27, 2017
Spec. No. 582120600 (Model 801DB
NVGB
)
Page 28 of 75
Right Angle Lug Adaptor Kits, P/Ns 556377 and 556378
Features
♦
These kits allow for load connections to the List 115, 116, 125, and 126 panels at right angle to the standard connection
and also allows for use of up to 4/0 AWG wire. The lug adapters are designed for use with 2-hole lugs with 3/8” clearance
holes on 1” centers. The lug adapters permit installation of cables back to back.
♦
Part No. 556377 provides one (1) busbar P/N 555918, six (6) 1/4” flat washers P/N 214110100, six (6) 1/4” split lock
washers P/N 215111100, and six (6) 1/4-20 hex nuts P/N 228557100.
♦
Part No.556378 provides one (1) busbar P/N 555919, six (6) 1/4” flat washers P/N 214110100, six (6) 1/4” split lock washers
P/N 215111100, and six (6) 1/4-20 hex nuts P/N 228557100.
Restrictions
For use with lists 115,116,125 and 126.
For use with three-pole circuit breaker or 3-pole ground/return only.
Ordering Notes
1)
Order as required. Refer to the following table.
Application for
Right Angle Adaptors
Left Side
(viewed from rear)
Right Side
(viewed from rear)
Top Feed Application
P/N 556378
P/N 556377
Bottom Feed Application
P/N 556377
P/N 556378
582120600 List 115
(some components
not shown for clarity only)
582120600 List 115
P/N 556377
Right Angle
Lug Adapter Kit
P/N 556377
Right Angle
Lug Adapter Kit
P/N 556378
Right Angle
Lug Adapter Kit
P/N 556378
Right Angle
Lug Adapter Kit
rear
rear
