System Application Guide
SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB
)
Revision BK, September 27, 2017
Page 13 of 75
List 110: Distribution Panel, 8-Panel Bay
Features
♦
Twelve (12) TLS/TPS fuse positions, or six (6) TPL fuse positions, or a combination of TLS/TPS and TPL fuse positions.
♦
Includes (12) TLS/TPS Fuseholders P/N 248817100. For panels factory configured in a
bay, each TPL Fuseholder P/N 516241 ordered replaces (2) P/N 248817100 Fuseholders.
♦
See
under
Wiring Illustrations
in ACCESSORY
DESCRIPTIONS for load termination specifications.
Restrictions
640A maximum continuous.
For use in
Ordering Notes
1)
Order as required.
2)
Specify up to twelve (12) TLS/TPS fuseholders, or up to six (6) TPL fuseholders, or a
combination per Distribution Panel (all positions MUST be filled). This instructs the
factory how to configure the Distribution Panel. Also specify mounting location for each
configured Distribution Panel per bay. This instructs the factory where to mount each
configured Distribution Panel per bay.
3)
Order distribution fuses and load lugs as required per
in ACCESSORY DESCRIPTIONS.
4)
Replacement panels will be equipped with 12 TLS/TPS Fuseholders. TPL fuseholders (P/N 516241) may be ordered to
field modify the distribution panel. One TPL fuseholder takes the space of two TLS/TPS fuseholders.
List 115: Distribution Panel, 8-Panel Bay
Features
♦
Sixteen (16) bullet nose circuit breaker and/or TLS/TPS Fuse (with bullet nose fuseholder) positions.
♦
See
under
Wiring Illustrations
in ACCESSORY DESCRIPTIONS for load termination
specifications.
Restrictions
640A maximum continuous.
For use in
Caution: Circuit breaker with a 150 ampere or greater rating SHALL HAVE an empty
mounting position between it and any other overcurrent protective device.
Ordering Notes
1)
Order as required.
2)
Specify mounting location for each Distribution Panel per bay. This instructs the factory
where to mount each Distribution Panel when the bay is populated with different types
of Distribution Panels.
3)
Order distribution fuses, fuseholders, circuit breakers, and load lugs as required per
Distribution Devices and Lug Selection
in ACCESSORY DESCRIPTIONS.
4)
Order TVSS Device(s) as required per
Transient Voltage Surge Suppressor (TVSS)
in ACCESSORY DESCRIPTIONS.
