8
GUI: Advanced Settings
DMS-CTC-20110909-0007 v2.0
81
8.1.2 Restore
Defaults
Introduction
The
Restore Defaults
page allows you to restore the HBA to the factory defaults.
Resetting the HBA
Proceed as follows:
1
On the top menu, click
Advanced
.
2
The
Advanced
page appears. Click
HBA Advanced Settings
on the bottom of
the page and then click
Yes
t o confirm that you want to access the advanced
settings.
3
Under ,
click
Restore Defaults
.
4
The
Attention
page appears.
5
Optionally, click
Save Configuration File
to save the current configuration of the
HBA. This allows you to restore this configuration at any time. For more
information, see
“8.1.10 Configuration File” on page 93
.
6
Click
Restore Defaults
.
7
The HBA prompts you to confirm your choice.
Click
Restore OK
.
As described in
“1.1 Basic Concepts” on page 3
, both the HBR and the HBA are
responsible for bringing the Verizon services into your home.
It is therefore important to know that a reset to defaults may influence
specific services. If you reset:
The HBR, local network settings such as changes to WiFi SSID or keys, the
LAN address range, or time zone/DST will be lost.
The HBA, settings of Internet-related services such as Firewall, port
forwarding, and Parental controls would be reset.
Summary of Contents for HomeFusion Broadband
