Verizon HomeFusion Broadband, User Manual

Page: 18 / 148

2 Setup
DMS-CTC-20110909-0007 v2.0 13
Setup procedure
Complete the following steps to setup the HBR:
1 If a different router was being used previously, disconnect it. Remove all
components, including power supplies and cables; they will not work with the
HBR.
2 Connect the HBR to the HBA.
For more information, see
“2.1 Connecting the HBR to the MoCA Network” on
page 14 .
3 Power on the HBR.
For more information, see
“2.2 Powering on the HBR” on page 15 .
4 Connect your network devices.
For more information, see
“2.3 Connecting Your Network Devices” on page 16 .
In case of problems
If you have trouble configuring the HBR, try the following:
1 Refer to “Support” on page 136 .
2 If you did not find a solution in the Troubleshooting section, call the Customer
Care at
800-922-0204 .
Optional configuration
After completing the setup procedure, the HBR is ready for use. Optionally, you can
now:
 Further configure the HBR to your needs (for example, change the wireless
security) using the Graphical User Interface (GUI) of the HBR.
For more information, see
“Graphical User Interface (GUI)” on page 26 .
 Wall mount the HBR. For more information, see “2.4 Wall Mounting the HBR
(Optional)” on page 24 .
Normally, the Verizon Wireless technician already took care of the
installation of your HBR and HBA. So the only thing that you might need to
do is add new network devices to your network.