VeriFone Omni 3200SE, Installation Manual

Page: 25 / 36

I
NSTALLATION
G
UIDE
25
C
HAPTER
4
Maintenance
The Omni 3200
SE
/3210
SE
terminal is a secure product with no user-maintainable
parts. Do not attempt to open or repair the terminal.
Clean the
Terminal
To properly maintain a Omni 3200
SE
/3210
SE
terminal, clean it regularly to remove
dust, accumulations of dirt or grease, and fingerprints.
To clean the terminal, use a clean cloth slightly dampened with water and a drop
or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner.
For best results, use a VeriFone Cleaning Kit (refer to Accessories and
Documentation ).
Clean the
Printer
Every few months, check and clean the integrated thermal printer:
1
Be sure the terminal is connected to a power source.
2
Open the paper roll cover. See Install Paper Roll .
3
Lift out the paper roll and spindle from the paper roll cradle, if necessary.
4
Tip the terminal and tap it to remove any dirt, dust, or bits of paper present in
the printer compartment.
5
Re-install the paper roll, or install a new roll. See Install Paper Roll .
CAUTION Do not, under any circumstances, attempt any service, adjustments, or repairs on
this equipment, other than the simple cleaning processes discussed in Chapter 4 .
Instead, contact your local VeriFone distributor or service provider for assistance.
Failure to comply can invalidate the product warranty.
CAUTION Never use thinner, trichloroethylene, or ketone-based solvents – they may
deteriorate plastic or rubber parts.
Do not spray cleaners or other solutions directly onto the keypad or LCD screen.