VeriFone Omni 3200SE, Installation Manual

Page: 19 / 36

T
ERMINAL
S
ETUP
Connect Terminal Power Pack
I
NSTALLATION
G
UIDE
19
The Omni 3200
SE
/3210
SE
terminal supports the P250, P350,P900, and P950
VeriFone external printers. Contact your VeriFone representative or visit the
online store at
www.store.verifone.com
for information on these devices.
External printer connections are through the same port as check readers (see
Figure 11 ).
Connect Terminal
Power Pack
When finished connecting optional peripheral(s), connect the Omni 3200
SE
/
3210
SE
terminal to a power source.
1
Insert the round barrel connector (see Figure 12 ) into the power port,
identified by the icon at right.
a
To lock the connector into the power port, align the plastic lock tab so it
points up. Insert the connector and twist to the left.
b
To unlock the connector, twist it to the right.
2
Plug the power pack cable into a wall outlet or surge protector.
Figure 12 Omni 3200
SE
/3210
SE
Power Pack Connection
NOTE
To connect a Printer 250, a custom interface cable is required. VeriFone publishes
the specifications for this cable in the
Omni 3200
SE
/3210
SE
Reference Manual
(VPN - 22878).
CAUTION Using an incorrectly rated power supply can damage the terminal or cause it not
to work as specified. Before connecting, ensure that the power supply being used
to power the terminal matches the requirements specified at the back of the
terminal. (see
Chapter 3 , Specifications , for detailed power supply specifications).
Obtain the appropriately rated power supply before continuing.
NOTE
The round barrel connector on the power pack cable has a plastic lock tab that
secures the power cable to the terminal.