VeriFone Omni 3200SE, Installation Manual

Page: 12 / 36

T
ERMINAL
S
ETUP
Examine Terminal Features
12
I
NSTALLATION
G
UIDE
•
A magnetic card reader, built into the right side. The icon at right
shows the proper swipe direction, with the stripe down and facing
inward, toward the keypad.
•
A colored LED (Light Emitting Diode) indicator with the following states:
•
Steady green indicates power is ON.
•
Slow flashing green (roughly one flash per second) indicates no paper in
the printer.
•
Fast flashing green (roughly two flashes per second) indicates a printer
mechanism error.
•
Flashing red indicates the terminal is downloading printer-related files.
•
An internal thermal printer.
•
A paper roll cover release button.
•
A paper feed button.
Back Panel
Turn the terminal around to view the back panel with the connection ports, under
the paper roll case. Notice the different ports used to connect the Omni 3200
SE
/
3210
SE
teminal to a communications line, optional peripheral devices, and the
power supply (see Figure 4 ).
Figure 4 Connection Ports (Back Panel)
•
Two RJ-11 modular phone jacks can be used to connect the Omni 3200
SE
/
3210
SE
terminal to a telephone line:
•
One port can be identified by a Telco icon, shown at right. Use
this port to connect the Omni 3200
SE
/3210
SE
terminal directly to
a modular telephone wall jack (refer to Direct Connection ).
•
The other port can be identified by a by a Telset icon, shown at
right. Use this port to connect a telephone to the terminal (refer to
Pass-Through Connection ).
NOTE
VeriFone ships different variants of the Omni 3200
SE
/3210
SE
terminal for different
markets. Your terminal may have a different configuration than the terminal shown
in this guide, but the basic processes remain the same, regardless of terminal
configuration.