56
1. Attach a fresh water source to connection marked “Sewer Tank
Flusher”. Be sure termination valves are open on tanks.
2. Open valve to release water into tank for rinsing and cleaning of
your waste water holding tank.
3. Rinse for several minutes to remove any foreign matter from tank
and probes.
Remember the moisture content may give you a false reading on
your monitor panel indicating it is not empty. Allow time to dry out
tank or recharge for next usage.
Maintenance for Holding Tank
The following maintenance is recommended by holding tank supplier
to keep your tanks clean and keep probes free of debris and build-
up.
GRAY- -Waste water Tank— Fill tank with 8-10 gallons of warm
water. Add a degreaser such as a citrus cleaner or Dawn dish soap.
Leave the solution in tank while traveling. Drain and rinse tank.
BLACK—Sewer Tank— Fill tank with 8-10 gallons of water. Add one
bottle of drain cleaner, such as Drano or Liquid Plumber. Leave the
solution in tank while traveling. Drain and rinse.
Heated Fresh Water Tank
Hole or holes are placed from the fresh water tank compartment,
into the floor heat duct. This allows warm air to flow into the tank
area. NOTE: The waste holding tanks may not be heated.
Winterizing Your Recreational Vehicle
Preparing your coach for cold weather is critical in most states and
Canada. Failure to prepare your coach for weather will cause the
water systems to freeze, resulting in broken components. Damages
related to freezing are NOT covered under the terms of your limited
warranty.
Two methods of winterizing your coach after draining and flushing
drainage system are listed, following ;
PDF created with pdfFactory trial version
www.pdffactory.com
