20
TOY HAULER—CARGO INFORMATION
In Toy Hauler units, you may place 40% of (C.C.C.) carrying
cargo capacity in rear area, and then distribute remaining
pounds. Place 2 pounds in front of axle to every 1 pound
behind axle, some of this weight will be on top of axles.
Below is a blank space for you to calculate the “ Cargo Carry
Capacity “ of your unit, based on this 40% formula. You will find the
weights of your unit on a sticker, placed on the edge of the screen
door. This will enable you to determine your “ Cargo Carry Capacity
“ in the different areas of your unit.
When loading heavy cargo/contents into the rear storage area, you
MUST have ALL the stabilizer jacks in down position for support
during loading.
Since Toy Haulers are designed and built to carry cargo in the rear
portion of the unit, special care must be exercised in loading to
prevent potential handling concerns.
Any cargo in rear area, MUST BE secured behind axles, during
movement of unit. For this reason, D Rings are installed on the floor
of the cargo room.
Any two wheel items such as bicycles or motorcycles, will require
additional support for the front wheel, such as a “ wheel chock “. Any
such stabilizer item such as a wheel chock, should be installed per
manufacture instructions.
The tie downs ( D Rings ) provided are for general purpose use,
rating of 1,500 lbs,. each.
Please refer to owners manuals or contact the manufacture of these
specific items for more information
PDF created with pdfFactory trial version
www.pdffactory.com
