16
2. Open the coupler latch.
3. Back the tow vehicle into proper position.
4. Turn the crank on the jack to lower the coupler onto the ball
hitch.
5. Close the coupler latch after completely seated.
6. Install weight distributing bars (equalizer), when required, as
recommended by hitch supplier.
7. Retract the tongue jack to its maximum height.
8. Attach the cable for the breakaway switch to the tow vehicle.
9. Attach safety chains as per your state laws.
10. Attach your 12-volt seven way electrical connector from the tow
vehicle to the trailer connector.
11. Below are listed numerous items that should be inspected and
tested before traveling:
q
All lights working on outside of coach.
q
Stabilizer jacks in retracted position.
q
Steps in retracted position.
q
Refrigerator door latched completely.
q
Loose items in secure position.
q
Test brakes for operation before entering roadway.
The Safety Chain (Travel Trailer)
Safety chain requirements will vary from state to state. The chain
supplied with your coach meets SAE requirements for maximum
gross trailer weight.
1. Cross the left chain under the coupler and attach to the right ring
on hitch receiver of tow vehicle
2. Now take right chain under the coupler and attach to left ring on
hitch receiver.
Remember – always have the safety chain attached to tow vehicle, as
required in your state.
CAUTION
!
PDF created with pdfFactory trial version
www.pdffactory.com
