Safety - 9
SAFETY
General Safety Procedures
for Ventrac Power Units, Attachments, & Accessories
Training Required
• The owner of this machine is solely responsible for properly training the operators.
• The owner/operator is solely responsible for the operation of this machine and for the prevention of ac-
cidents or injuries occurring to him/herself, other people, or property.
• Do not allow operation or service by children or untrained personnel. Local regulations may restrict the
age of the operator.
• Before operating this machine, read the operator’s manual and understand its contents.
• If the operator of the machine cannot understand this manual, then it is the responsibility of this machine’s
owner to fully explain the material within this manual to the operator.
• Learn and understand the use of all the controls.
• Know how to stop the power unit and the attachments quickly in the event of an emergency.
Requirements for Personal Protective Equipment (PPE)
• The owner is responsible for ensuring that all the operators use the proper PPE while operating the ma-
chine. Whenever you use the machine, use the following PPE:
•
Certified eye protection and hearing protection.
• Closed toe, slip resistant footwear.
• Long pants or trousers.
• A dust mask for dusty conditions.
• Additional PPE may be required. Refer to the product safety procedures for any additional requirements.
Operation Safety
• Secure long hair and loose clothing. Do not wear jewelry.
• Inspect the machine before operation. Repair or replace any damaged, worn, or missing parts. Be sure the
guards and shields are in proper working condition and are secured in place. Make any necessary adjust-
ments before operating the machine.
• Some pictures in this manual may show shields or covers opened or removed in order to clearly illustrate the
instructions. Under no circumstance should the machine be operated without these devices in place.
•
Alterations or modifications to this machine can reduce safety and could cause damage to the machine. Do
not alter the safety devices or operate with the shields or covers removed.
• Before each use, verify that all the controls function properly and inspect all the safety devices. Do not op-
erate if the controls or safety devices are not in proper working condition.
• Check the parking brake function before operating. Repair or adjust the parking brake if necessary.
• Observe and follow all of the safety decals.
• All the controls are to be operated from the operator’s station only.
• Always wear a seat belt if the machine has a roll cage/bar installed and in the upright position.
https://www.tractormanualpdf.info/
