![Ventrac 4520K Operator'S Manual Download Page 20](http://html.mh-extra.com/html/ventrac/4520k/4520k_operators-manual_1002359020.webp)
SAFETY
Safety - 20
1. Warning - 20 degree maximum slope rating when equipped with
single wheels.
2. Warning - 25 degree maximum slope rating when equipped with 7.6
cm (3 inch) wheel extensions.
3. Warning - 30 degree maximum slope rating when equipped with dual
wheels.
4. Slope rating may be reduced when adding a cab and other accesso-
ries or attachments. Read the operator’s manual for the cab, acces-
sory, or attachment being used.
5. Reduce speed on slopes, especially when turning. Avoid sharp turns
when operating on slopes.
6. Use low range when operating on slopes. Do not shift between high
and low range on a slope.
7. Torque the wheel lug nuts to 75 Nm (55 ft-lbs).
8. Torque the dual wheel hub draw bolts to 163 Nm (120 ft-lbs).
9. Inflate All Terrain tires to the pressure range indicated for single
wheels and the inner and outer dual wheels.
10. Inflate Bar tires to the pressure range indicated for single wheels and
the inner and outer dual wheels.
11. Inflate Turf tires to the pressure range indicated for single wheels and
the inner and outer dual wheels.
H
1
1. Pinching or crushing hazard - foot. Stay away from
moving parts.
1
4
5
6
7
8
9
10
11
2
3
E
1
2
3
4
5
6
1. Caustic liquid/chemical burns hazard.
2. Explosion hazard - batteries produce flammable and explo
-
sive gases.
3. Do not expose the battery to arcs, sparks, or open flame. Do
not smoke near batteries.
4. Keep bystanders away from the battery.
5. Wear eye protection, such as goggles or a face shield, when
checking or servicing batteries.
6. Wear protective gear, such as rubber gloves and an apron,
when checking or servicing batteries.
1. Place this side of the rim against the axle hub. Do
not install the wheel lug nuts on this side of the
rim. Refer to the operator's manual.
1
G
F
https://www.tractormanualpdf.info/