PG-6
07/2003
PG-7
07/2003
•
To exit the sub-modes, press selection button#1.
Cash Data
Allows you to retrieve historical information regarding the money accepted by the vendor.
To clear the individual selection cash data, you must have the
MIS Auto Reset
in the
Configuration
mode turned ON.
•
Press selection button #4 when the display reads
Cash Data
.
•
The non-resettable historical data is displayed.
•
To display resettable individual selections, press selection button #2 (up) or
selection button #3 (down) until you reach the desired selection.
•
To reset historical data, make sure the
MIS Auto Reset
is turned ON in the
configuration mode.
•
To exit mode, press selection button #1.
Sales Data
Allows you to retrieve historical information regarding the number of units sold by the
vendor. To clear the individual selection sales data, you must have the
MIS Auto Reset
in
the
Configuration
mode turned ON.
•
Press selection button #4 when the display reads
Sales Data
.
•
The non-resettable historical data is displayed.
•
To display resettable individual selections, press selection button #2 (up) or
selection button #3 (down) until you reach the desired selection.
•
To reset historical data, make sure the
MIS data reset
is turned ON in the
C
onfiguration
mode.
•
To exit mode, press selection button #1.
Discount Counter
(This item will only show when discounts are used.)
Allows you to access the sales and cash data for vends that have been discounted.
•
Press selection button #4 when the display reads
Discount Counter
. The display
will change to read
Cash Data
.
•
Press selection button #4 when the display reads
Cash Data
.
•
The display will change to read
Cash Data Total
and display the value of all
discounts towards paid sales. This total is non-resettable and begins when the
discount feature is enabled.
•
Pressing selection button #2 (up) or selection button #3 (down) will scroll through
all of the selection buttons and display the value of the discounts toward product
sales. The amounts for the individual selections can be reset using the rules in
the
Configuration
mode.
•
To exit this mode, press selection button #1.
•
The display will return to
Discount Counter, Cash Data
.
Summary of Contents for VARI-PAK 450
