Vendo VARI-PAK 450, Manual

Page: 41 / 113

PG-8
07/2003
PG-9
07/2003
Multi-Vend
ON = The consumer may insert enough credit to make multiple vends. The credit will remain
on the display until an additional vend is made or the coin return button is pressed.
OFF = The consumer is only allowed to make a single vend and the credit (if applicable),
will be returned after the completion of the vend.
Deny Escrow
ON = The validator will stack all bills received.
OFF = The validator will not stack the bills, rather it will hold them in escrow until a vend
is complete.
SO Indicator
ON = A small symbol will appear in the lower right hand corner of the display when at least
one column is sold out or the machine detects an error.
OFF = The symbol will not appear.
Count by Selection/Price
COUNT BY SELECTION = Individual sales and cash data will be reported in unit sales.
COUNT BY PRICE = Individual sales and cash data will be reported by vend price.
MIS Reset with DEX
ON = The resettable MIS data will be reset when a DEX read has been completed.
OFF = The resettable MIS data will not be reset when a DEX read has been completed.
*When the
Timing Features
are turned ON, you will have access to additional modes in
the programming relating to the internal timing and blocking functions.
• To adjust any of the settings, press selection button #4 at Configuration mode.
•
Press selection button #2 (up) or selection button #3 (down) to scroll through the
various sub-modes.
•
Press selection button #4 to change the status of the mode. The current setting will
begin to flash.
• Press selection button #2 (up) or selection button #3 (down) to change the current
setting.
• Press selection button #1 to exit the mode.
Space to Sales
Allows you to program which column will vend when you choose a desired selection
button. There are 6 preset configurations (See Page PG-23). You also have the option
of customizing the space to sales. To change current setting:
•
Press selection button #4 at the Space to Sales prompt.
• The current space to sales setting will be displayed.
•
Press selection button #4 to change the current setting.
•
Press selection button #2 (up) or selection button #3 (down) to toggle through the