Vendo VARI-PAK 450, Manual

Page: 36 / 113

PG-4
07/2003
PG-5
07/2003
§
Fail – Column Jam will be displayed if the motor is not in the home
position and will not move.
§
Fail – No Connection will be displayed if the motor is disconnected.
§
Fail – High Current will be displayed if the motor has a short.
Test Mode - Jog
• At Test mode, press selection button #4
•
Press selection button #2 (up) or selection button #3 (down) until the display reads
Test Mode - Jog
• At Test M ode – Jog press selection button #4
•
Test Mode – Jog; Column A1&A2 will be displayed indicating that a jog test of the
first column may be initiated.
•
Press selection button #2 (up) or selection button #3 (down) to choose desired
column.
• Press selection button #4 and Column nn&nn Forward will be displayed indicating
a forward motion of the motor.
• Press selection button #2 (up) or selection button #3 (down) to toggle between
Forward
and
Reverse
.
• Pressing selection button #4 will initiate a jog test of the last displayed motor in the
last displayed direction. Please note that the jog will not be allowed to continue to
a point, or in a direction, that will damage any part of the mechanism.
• Press selection button #1 twice to return to the Test Mode – Jog display.
Test Mode - Display
• At Test mode, press selection button #4.
• Press selection button #2 (up) or selection button #3 (down) until the display reads
Test Mode – Display.
• At Test mode – Display , press selection button #4
•
If functional, all 20 characters of the display should illuminate.
• Press selection switch #1 to return to Test Mode – Display .
Test Mode - Switches
•
At Test mode, press selection button #4.
• Press selection button #2 (up) or selection button #3 (down) until the display
reads
Test Mode – Switches.
• Press selection button #4 and the display will read Test Mode – Switches;
Selection ?
•
Activation of each selection button will display the selection switch number.
• Press and hold selection button #1 for at least 2 seconds to return to Test Mode
– Switches.
Test Mode - Relays
Allows you to test compressor, fan, lights and heater via the relays.
•
At Test mode, press selection button #4.
• Press selection button #2 (up) or selection button #3 (down) until the display
reads
Test Mode - Relays
• Press selection button #4.