PG-4
07/2003
PG-5
07/2003
•
To advance through sub-modes, press selection button #2 (up) or selection button
#3 (down).
•
To test the compressor, press selection button #4 when the display reads
Compressor Off
.
•
Off
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
Off
to
On
.
•
Press selection button #4 and the compressor should turn on.
•
To turn the compressor off, press selection button #4 when the display reads
Compressor On
.
•
On
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
On
to
Off
.
•
Press selection button #4 and the compressor should turn off.
•
To test the optional evaporator fan relay, press selection button #4 when the
display reads
Fan Off.
•
Off
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
Off
to
On
.
•
Press selection button #4 and the evaporator should turn on.
•
To turn the evaporator off, press selection button #4 when the display reads
Evaporator On
.
•
On
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
On
to
Off
.
•
Press selection button #4 and the evaporator should turn off.
•
To test the lighting system, press selection button #4 when the display reads
Light
Off.
•
Off
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
Off
to
On
.
•
Press selection button #4 and the lights should turn on.
•
To turn the lights off, press selection button #4 when the display reads
Lights On
.
•
On
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
On
to
Off
.
•
Press selection button #4 and the lights should turn off.
•
NOTE: The lights will stay on during the rest of the programming if you do not turn
them off. This is to provide lighting during service work.
•
To test the optional heater, press selection button #4 when the display reads
Heater Off.
•
Off
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
Off
to
On
.
•
Press selection button #4 and the heater should turn on.
•
To turn the heater off, press selection button #4 when the display reads
Heater
On
.
•
On
will begin to flash.
•
Press selection button #2 (up) or #3 (down) to change
On
to
Off
.
•
Press selection button #4 and the heater should turn off.
Summary of Contents for VARI-PAK 450
