Vendo VARI-PAK 450, Manual

Page: 49 / 113

PG-16
07/2003
PG-17
07/2003
•
Press selection button #4 to save the status change and return to the
Enable
submode.
• Press selection button #2 (up) to advance to Discounted Selection.
• Press selection button #4 to change the status of the selection buttons during the discount
mode.
• Press selection button #2 (up) or selection button #3 (down) to cycle through the available
selections or
All Selections.
• Press selection button #4 to change the status of the selections. If the status is On , the
selections will be discounted during the established time. If the status is Off , the selections
will not be discounted during the established time.
• Press selection button #2 (up) or selection button #3 (down) to toggle between On/Off .
•
Press selection button #4 to save the setting.
• Press selection button #1 to return to Discounted Selection .
To set the start time
• Press selection button #2 (up) when the display reads Discounted Selection .
•
Press selection button #4 when the display reads
Start Time
.
• Press selection button #4 when the display reads Start Day .
• Press selection button #2 (up) or selection button #3 (down) to cycle through the days or
Every Day.
• Press selection button #4 to change the status of the days. If the status is On, the days will
be enabled during the discount time. If the status is
Off,
the days will be disabled during
the discount time.
• Press selection button #2 (up) or selection button #3 (down) to toggle between On/Off .
•
Press selection button #4 to save the setting.
• Press selection button #1 to return to Start Day .
•
Press selection button #2 (up) to advance to
Start hh:mm
.
• Press selection button #4 and the hour setting will begin to blink indicating that it is ready
to be edited.
•
Press selection button #2 (up) or selection button #3 (down) to choose the desired start
hour. The time is in a 24-hour format.
•
Press selection button #4 and the minutes will begin to flash.
• Press selection button #2 (up) or selection button #3 (down) to choose the desired start
minutes.
•
Pressing selection button #4 will save your settings.
• Press selection button #1 to return to Start Time .
To set the stop time
• Press selection button #2 (up) when the display reads Start Time .
• Press selection button #4 when the display reads Stop Time .
•
Press selection button #4 when the display reads Stop Day .
• Press selection button #2 (up) or selection button #3 (down) to cycle through the days or
Every Day.
• Press selection button #4 to change the status of the days. If the status is On, the days will
be enabled during the discount time. If the status is Off, the days will be disabled during