Vendlet 6000000 User Manual Download Page 40 | Manualshive

Page: 40 / 56

background image

40

PART 3 - Technical manual

Connection of cables to control unit

The next step is to connect the actuator cables.

The red side actuator cables have plugs with
green O rings; these are connected to the
green control unit colour codes.

The blue side actuator cables have plugs with
yellow O rings; these are connected to the
yellow control unit colour codes.

The plugs on the blue bar motor cables are
fitted with a blue O ring; these are connected
to the blue control unit colour code.

The plugs on the red bar motor cables are
fitted with a red O ring; these are connected to
the red control unit colour code.

Connection of power cables

The last step is to connect the control unit
power cable to an easily accessible 230V mains
plug. The green diode on the control unit
illuminates when the power is turned on.

Keep all cables away from the floor and the
moving parts of the bed. Once the mounting
is complete, all loose cables must be wrapped
around the control unit mounting fixture cable
guides and secured to prevent them from
falling on the floor or getting pinched by the
moving parts of the bed.

Proper plug location

The green diode on the control unit is

illuminated

All cables must be kept away from the floor

Attaching the sheets

Please refer to page 24 for instructions on how to attach the sheets.

Attaching plastic side rails, if relevant

Please refer to page 21 for instructions on how to the attach the plastic siderails.

«
...
38
39
40
41
42
...
»

Summary of Contents for 6000000

























































Reviews:

No comments

Related manuals for 6000000

Brand: zipwake Pages: 2

Brand: zipwake Pages: 2

Brand: GE Pages: 14

Brand: GE Pages: 11

Brand: GE Pages: 20

Druck ADTS 2 Series

Brand: GE Pages: 18

Brand: KaVo Pages: 13

Brand: vc999 Pages: 52

Brand: Zetec Pages: 23

Brand: Olsen Pages: 56

Brand: Waterous Pages: 5

Brand: 3TECH Pages: 32

Brand: 4EVAC Pages: 15

medialon Showmaster Go

Brand: 7th Sense Pages: 9

Brand: Tascam Pages: 8

Brand: B-K lighting Pages: 5

Brand: B-K lighting Pages: 4

Brand: B-K lighting Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands