Vendlet 6000000 User Manual Download Page 3 | Manualshive

Page: 3 / 56

background image

Congratulations on your new VENDLET V5 or VENDLET V5+.

The VENDLET V5 and VENDLET V5+ are used for handling bedridden patients, for example:

•

turning

•

moving from one side of the bed to the other

•

repositioning the patient up in the bed

•

mobilizing the patient in and out of the bed

•

transferring the patient from one bed to another

The VENDLET V5 has a load capacity of 200 kg.

The VENDLET V5+ has a load capacity of 400 kg and is designed for bariatric patients;
otherwise, the VENDLET 5+ has exactly the same functionalities and use as the
VENDLET V5.

The instructions in this manual must be followed. VENDLET ApS shall not be liable should
the VENDLET V5 or VENDLET V5+ be used, modified, or assembled in a way that is not
described in this manual.

This manual is divided into three parts:

Part 1 contains general information that is useful to everyone responsible for the
purchasing, examination, use, assembly, and maintenance of the VENDLET V5 and
VENDLET V5+.

Part 2 is a user manual containing information about the operation and daily maintenance
of the VENDLET V5 and VENDLET V5+.

Part 3 is a technical manual containing information about the assembly, maintenance, and
service of the VENDLET V5 and VENDLET V5+.

«
1
2
3
4
5
...
»

Summary of Contents for 6000000

























































Reviews:

No comments

Related manuals for 6000000

Brand: Labnet Pages: 5

Brand: GE Pages: 14

Brand: GE Pages: 11

Brand: GE Pages: 20

Druck ADTS 2 Series

Brand: GE Pages: 18

Brand: ADVANCED HOME CARE Pages: 16

Brand: Velocitek Pages: 81

ABS-Lock X-Flat

Brand: ABS Pages: 8

ABS-Lock X-DURCH

Brand: ABS Pages: 8

Brand: ABS Pages: 8

Brand: Danelec Pages: 67

Brand: Haki Pages: 24

Brand: Dakota Digital Pages: 5

Brand: dbx Pages: 2

Brand: Eagle Group Pages: 8

Tablet1000 Series

Brand: Hantek Pages: 98

Brand: Oakworks Medical Pages: 28

Brand: Park House Healthcare Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands