44
PART 3 - Technical manual
DISMOUNTING, STORAGE, AND REMOUNTING
Dismounting
The VENDLET V5 may be dismounted and transferred to another bed.
1. Disconnect the power cable from the outlet.
2. Disconnect all plugs from the control unit and remove the cable ties holding the
cables.
3. Remove the suspension plate and remove the control unit from the suspension
plate.
4. Remove the bars on both sides. Coil up the motor cables and attach them to the
bars using cable ties.
5. Remove the two support bars.
6. Remove the actuator fittings from the mounting brackets. Coil up the actuator
cables and secure them using cable ties.
7. Dismount the mounting brackets with mounting plate and spacers, if any.
8. Pack all parts carefully together. Store bolts, nuts, and washers in a bag.
Check all bolts and nuts for signs of damage and discard all damaged parts.
Storage
The VENDLET system should be stored in a dry location.
Temperature:
-10°C - +50° C
Relative air humidity:
20% - 90% @ 30° C. No condensation.
Atmospheric pressure:
700 – 1060 hPa.
Remounting
Follow the procedure described in this manual if remounting is required.
Before the mounting, you should check all VENDLET V5 / VENDLET V5+ parts for dam-
age and whether the date of the annual service check has not been exceeded.
