Velasa Sports Sparx ES100, Operating Manual

Page: 31 / 208

MAINTENANCE
27
There are no user-repairable parts in the
Sparx™ Sharpener. Refer to “Exclusions” in
the Warranty section for more information.
Maintenance of the Sparx™ Sharpener is
limited to the procedures outlined in this
section.
REMOVING AND
EMPTyING THE DUST
TRAy
To watch the How-To video, visit
sparxhockey.com/dusttray
Maintenance Frequency: Perform the
following steps after
every 20 Sharpenings
(160 cycles on the Radius Ring™, FIRE
Ring™, or X-Grind Ring for PS100) and
before moving and/or traveling with the
sharpener.
1
REMOVE AND EMPTY THE
DUST TRAY
Open the
Glass Door
and remove the
Dust
Tray . To empty Dust Tray —wipe completely
clean with a damp cloth (water).
Do not use any solvents or cleaning
chemicals in and around the Skate
Sharpener .
2 VACUUM SHARPENER
Without removing the Air Filter , thoroughly
vacuum the top, sides, and around the Air
Filter Housing . We recommend using a
HEPA certified vacuum.
3
REPLACE THE DUST TRAY
Slide the Dust Tray back into the machine.
Close the Glass Door .
REPLACING THE AIR
fILTER
ES100 Skate Sharpener Only
To order a replacement Air Filter , visit
sparxhockey.com/filter .
To watch the How-To video, visit
sparxhockey.com/airfilter
Standard Grinding Ring Use (Radius Rings™
and FIRE Rings™) : The Air Filter should be
replaced every 4 Grinding Rings ( 1,280
cycles ).
Maintenance Frequency: The Air Filter
replacement limits listed above are related
to the type of
Grinding Rings
being used and
refer to the maximum amount of usage that
an Air Filter should have when using a specific
type of Grinding Ring .
The f Air Filter Button will light up to remind
you to replace the Air Filter at the Standard
Grinding Ring Use interval ONLY.
6
MAINTENANCE