Velasa Sports Sparx ES100, Operating Manual

Page: 13 / 208

INTRODUCTION
9
GRINDING RING LIfE
INDICATOR BEHAVIOR
In normal operation, each part of the Grinding Ring Life Indicator corresponds to 10% of the
Grinding Ring’s life. These parts are the one circle and the nine bars to the right (10 parts total
or 100%). The circle represents the final 10% of Grinding Ring life and each bar to the right is an
additional 10%. When a part is illuminated, that corresponding 10% life is present on the
Grinding
Ring . When the part is no longer illuminated that amount of the wheel life has been consumed.
The circle of the Grinding Ring Life Indicator can also behave in other ways to indicate different
operating conditions to the user. Refer to the table below for more information.
ICON ACTION DESCRIPTION
Circle is white and steady.
The Grinding Ring has more
than 10% of life remaining.
Circle is white and pulsing.
Grinding Ring has less
than 10% of life remaining.
We Recommend that the
user order a replacement
Grinding Ring by visiting
www.sparxhockey.com.
Circle is white and blinking.
User has attempted to start
Alignment Mode while a
Grinding Ring is installed.
Circle is red and steady. No Grinding Ring installed.
Circle is red and pulsing.
During sharpening, the
Grinding Ring has less
than 10% of life remaining.
We Recommend that the
user order a replacement
Grinding Ring by visiting
www.sparxhockey.com.
Circle is red and blinking. Grinding Ring is Empty.
Circle half red/half white - alternate
blinking.
User has attempted to
sharpen with a cycle count
greater than the number
of cycles remaining on the
Grinding Ring .