Velasa Sports Sparx ES100, Operating Manual

Page: 23 / 208

OPERATION
19
EDGE DEBURRING
To watch the How-To video, visit
sparxhockey.com/deburr
We recommend using protective gloves
when deburring the skate blade.
1
DEBURR THE BLADE WITH
THE STONE
Press the Honing Stone (A) against the
face of the skate blade (B). Do not put
pressure on the side of the stone closest to
the blade edge. With light pressure, press
down on the lower side of the stone (C)
and slowly run the stone back and forth
along the length of the blade for four full
passes.
2
REPEAT ON THE OPPOSITE
SIDE
Turn the skate over. Repeat step 1 on the
opposite side of the blade.
3
DEBURR THE BLADE WITH
THE STROP
Press the Leather Strop (A) against the
edge of the skate blade (B) at a 45 degree
angle. With light pressure, slowly run the
strop back and forth along the length of
the edge for four full passes
A
B
4
REPEAT ON THE OPPOSITE
SIDE
Turn the skate over. Repeat step 3 on the
opposite edge of the blade.
POWERING Off
1
LOCATE THE POWER INPUT
PORT
On the back of the sharpener, locate the
Power Input Port .
2
TURN OFF THE SHARPENER
Toggle the Power Input Port switch to the
off position (I=on, 0=off).
B
C
A