7.2 Net Wiz
Net Wiz verifies the status of each IP address in the user selected range, by using ARP (Address Resolution Protocol) and ICMP
test.
7.2.1 Net Wiz Setup
Profile:
Drop-down selections are Default, Delete, Save, Save As...
Begin IP:
Set the start address for the desired IP range using the numeric keypad.
End IP:
Set the end address for the desired IP range using the numeric keypad.
Select the test by placing a check mark in the corresponding box of any of the following: ARP, Ping.
Net Wiz Setup
7.2.2 Net Wiz Results
Summary
indicates the test status and reports:
TX
/
RX Frames:
Total number of TX (transmitted) and RX (received) frames
RX Errors:
Received frames in error
Speed Advert:
Speed advertised
Duplex Advert:
Duplex mode advertised
Device Found:
Total number of Devices and Networks found
Net Wiz Results Summary
TX300s_Platform_Manual_RevB00
Page 68 of 104
Summary of Contents for TX300s
