VeEX MTX150 Series User Manual Download Page 167

Page: 167 / 303

167

Ethernet

User Managed

– Advanced users can perform internet speed tests by manually selecting

servers from pre-configured lists, using the Manual mode. In User Managed mode, enter

the server IP/URL and save it to a server list that can be maintained and managed on its

own. Options to modify or delete server lists are available under

Server List Manage

Manual

– Advanced users, with detailed knowledge of their Speedtest servers, can manu-

ally add their own servers, test files and maintain their own server lists. Enter the IP/URL of

the server to test. If TCP port number 8080 is used, there is no need to enter a Path and

File name. Port 8080 is used by Ookla netgauge servers, therefore the proper Speedtest

handshaking will take place between the test set (client) and Ookla server. If TCP port num-

ber 80 is used, the correct Path and Filename need to be entered.

Managed Server Tests

Server Named

FREMONT

Can Be Added to

server1

Creating New Server Profiles and Server Lists

1. From the Setup tab, select

Manual

from

Server Selection Mode

2. Tap

Update

and select a file to transfer. The

File Name

and

Path

will populate into the field. After

setting up the new server profile, tap the

Add To Server List

drop-down menu.

Save as new

cre-

ates a new server list and adds the current server profile to that list. The option to add the profile to

an existing server list is also available.

Summary of Contents for MTX150 Series

































































































































































































































































































Search results

Summary of Contents for MTX150 Series

Reviews:

Related manuals for MTX150 Series

Brands by name

Popular brands

VeEX MTX150 Series, User Manual

Search results

Summary of Contents for MTX150 Series

Reviews:

Related manuals for MTX150 Series

Brands by name

Popular brands