VeEX MTX150 Series, User Manual

Page: 165 / 303

165 © VeEX Inc. All Rights Reserved. Ethernet
Local End Tester - Bi-Directional Server Setup
2. Press Start test at the Near End. The entire test flow is automated. Results will show up as the tests
run – a total of 4 sessions.
l
Current test progress is shown in Event .
l
Summary (Page 1) provides information on the current session running and the RFC-6349
key performance indicators. Tap on Client Results to verify the metrics.
l
Final results of the completed test will show under Status .
V-TEST
The V-TEST feature qualifies network TCP/HTTP protocol performance by testing Internet speeds up to a full
line rate against a server to verify the maximum download and upload data rates attainable by subscribers'
high-speed or Gigabit Internet services.
Run a Speed Test
Press to run the Internet speed test.
After pressing GO, the test set does the following:
1. Identifies the internet service provider (ISP) and searches for the closest Ookla Speedtest® server,
based on round-trip response times.
2. Runs the Internet speed test for the Download direction (from server to test set), then the Upload
(from test set to server) and displays the results.
3. Once finished, the GO button will turn back to green. It is ready to save the results and/or run more
tests.