10.2 Net Wiz
Net Wiz verifies the status of each IP address in the selected range, by using ARP (Address Resolution Protocol) and ICMP test.
10.2.1 Net Wiz Setup
Profile:
Drop-down selections are Default, Delete, Save, Save As...
Begin IP:
Set the start address for the desired IP range using the numeric keypad
End IP:
Set the end address for the desired IP range using the numeric keypad
Select the test by placing a check mark in the corresponding box of any of the following: ARP, Ping.
Net Wiz Setup
10.2.2 Net Wiz Results
Summary
indicates the test status and reports:
TX
/
RX Frames:
Total number of TX (transmitted) and RX (received) frames
RX Errors:
Received frames in error
Speed Advert:
Speed advertised
Duplex Advert:
Duplex mode advertised
Device Found
: Total number of Devices and Networks found
Net Wiz Results Summary
CX380C User Manual RevA00
Page 83 of 105
