CaLan Master Profile
Channel Table
: Select the channel table that matches the system being swept.
Communications
: Two communication downstream frequency settings are required, one for the Forward Sweep and a second
for the Return Sweep. The upstream communications for the CX380C to communicate back to the CaLan 3010H+ is set by the
3010H+ and sent to the CX380C on the downstream communications. No upstream communications frequency setup is
required.
Forward Sweep Communications Freq (MHz)
:Enter the Communications Forward Frequency.
Return Sweep Communications Freq (MHz)
:Enter the Communications Return Frequency.
Low Pilot Channel
: Enter the Pilot channel/frequency.
High Pilot Channel
: Enter the Pilot channel/frequency.
Location(s)
: Tap the field to select the location with Sweep Limits configured. Multiple locations can be selected for the CaLan
Master Profile.
8.2 Run Sweep
From the CaLan Sweep Forward Sweep screen, select the Pilots and other settings to run Sweep.
CaLan Sweep (Forward Sweep)
CX380C User Manual RevA00
Page 56 of 105
