VeEX CX380C User Manual Download Page 96

Page: 96 / 105

Backlight - Brightness

Go back to top

Go back to TOC

11.1.6 Global Settings

General Setting

Language:

An alternative language for the user interface.

Units:

Measurement system (English - feet or Metric - meter)

Audible Alarm:

When enabled, the test set's buzzer will sound (beep) when alarms and errors are being detected.

Show Password:

Hides/shows username and password information associated with FTP and related IP functions

User Interface:

The USA user interface version presents SONET/DSn application-oriented menus, while the International

setting is more open to all settings.

Utility Settings - General Setting

Storage Setting

File Name Prefix:

Tap on the box to enter the file name prefix using the pop up alphanumeric keypad

Profile Deleting:

Auto Delete or Prompt User

Profile Saving:

Auto Overwrite or Prompt User

Result Saving:

Manual or Prompt User

Advanced Saving:

On/Off. Turning ON allows the addition of extra information to the results file so it can be uploaded to a

centralized R300 Server. Requires Advanced Management Option.

CX380C User Manual RevA00

Page 96 of 105

Summary of Contents for CX380C










































































































Search results

Summary of Contents for CX380C

Reviews:

Related manuals for CX380C

Brands by name

Popular brands

VeEX CX380C, User Manual

Search results

Summary of Contents for CX380C

Reviews:

Related manuals for CX380C

Brands by name

Popular brands