AP List
The following information is displayed for each AP:
SSID name of the AP
BSSID (MAC address) of the AP
802.11 protocol version supported by the AP
Max data rate supported by the AP
AP's radio channel number
Lock symbol indicates if security is set on the AP (WEP, WPA or WPA2).
When the AP is unsecured, no lock symbol is displayed
Signal strength of the AP
Select one of the Access Points (AP) to start a connection. If the AP is locked, a network key is required to complete the connection.
The key can either be 10 characters or 26 characters.
If the wrong network key is entered, the test set will connect to the Access Point, but will not be able to connect to the web
or perform the Ping test.
Once selected, an
Edit Settings
function key appears on the right hand side bar.
Tap on
Edit Settings
or
Connect AP
to change the Encryption Type and enter the WiFi Key.
Encryption Type:
Supported encryption types include WEP, WPA, and WPA2.
Key:
Security phrase or password necessary to access SSID and network. Tap the
Key
field to enter the AP password on the
pop-up keypad.
ASCII formatting supported
The password/phrase can be hidden (
Global Settings
>
Show Password
>
Yes/No
)
Passwords are case sensitive.
Tap
Apply
after selecting the Encryption Type and entering the Key. If the encryption menu was accessed via
Edit Settings
, press
Connect AP
to connect to the AP. If the encryption menu was accessed via
Connect AP
, the test set will automatically connect to
the AP after hitting Apply.
WiFi Wiz - AP Encryption Settings
Connect
The
Setup
Tab displays the Profile, ESSID, Encryption Type and Password.
CX380C User Manual RevA00
Page 86 of 105
