VeEX CX380C, User Manual

Page: 76 / 105

Use the Right/Left/Up/Down function keys or the arrow keys on the unit's keypad to navigate the graph and get additional
information for the access points. Detailed information for each Access Point includes:
SSID: name of the AP
AP's radio Channel number
Signal strength (dBm)
Number of co-channel: Number of APs using the same radio channel
Number of Overlapping APs: Number of APs using channels whose frequency band overlaps with the AP.
Go back to top Go back to TOC
9.5 OTDR Viewer
This functionality allows the test platform to open and analyze standard OTDR .SOR files created by the TX300S-OTDR, RXT-4100
OTDR, FX300 OTDR or other OTDR test sets. It can also be used to control the wireless OPX-BOXe OTDR via Bluetooth or USB
connection, offering full-featured OTDR functionality.
For more information about OTDR information, see the OTDR Series User Manual at www.veexinc.com .
Go back to top Go back to TOC
9.6 Ethernet Tools
Use this option for Layer 4+ V-Test Throughput and V-Perf TCP tests using the top 1000BT test port.
Go back to top Go back to TOC
9.7 HIP (Home Installation Process)
The Home Installation Process can be downloaded to the test unit to ensure consistency with installation practices. A HIP certificate
will confirm that each new installation conforms to provider operating guidelines and ISO quality standards. For more information
about the Home Installation Process feature, contact Customer Care .
Go back to top Go back to TOC
9.8 TDR
The optional built-in Time Domain Reflectometer (TDR) supports up to 2 km/6000 ft of coaxial cable. It detects faults along the full
run. It provides a pre-set gain and pulse width feature which adjusts the vertical position for each range setting. Additionally,
impedance settings can be selected and Velocity Propagation (VP) factors can be adjusted to perform tests on different cables.
Go back to top Go back to TOC
9.9 In Service Sweep
For more information on this non service interrupting forward path sweep feature, see Section 8.0 Sweep Operations .
Go back to top Go back to TOC
CX380C User Manual RevA00 Page 76 of 105