Vectra Genisys® Therapy System
PATiENT PrEPArATiON
37
Install sEMG Lead Wires to System
Connect a DURA-STICK II 1 .25 in (3 cm)
disposable electrode to each lead . These
electrodes are designed for use with
Chattanooga equipment and will provide
an accurate reading of sEMG activity .
Leave electrodes on the protective
backing until treatment area has been
prepared .
s
EMg ANd
s
EMg+STiM PATiENT PrEPArATiON
Remove the Front Access Cover from the
Therapy System and remove the existing
Lead Wires . Connect the sEMG Lead wires
to the channel(s) desired for use with the
sEMG or sEMG + Stim modality .
cOnnEcT
s
EMG lEaD wIrES
Replace the Front Access Cover .
NOTE:
Two Channels may be used for
sEMG Therapy at the same time . If four
electrotherapy channels are available, a
maximum of only two may be used at a
time and must be channels 1/2 or 3/4 .
Install DURA-STICK™ II Electrodes
Select Modality
Press the sEMG or sEMG + Stim button as
required for the therapy prescribed .
PrESS
s
EMG Or
s
EMG+STIM buTTOn
rEfErEncE (GrEEn) lEaD
acTIvE (rED) lEaD
acTIvE (black)
lEaD
This section applies only to models
capable of supporting the functions of the
sEMG module .
