Vectra Genisys® Therapy System
92
OPErATiON
SET uP OF NEw sEMg dATA CArd (CONTiNuEd)
Press the Begin Save button . A message will
appear verifying that sEMG data is being
recorded . After the message has been
removed, have the patient perform the
prescribed contractions .
Begin Save
bEGIn SavE buTTOn
When the desired character is framed, press
the Accept and Return Arrow button . The
character selected will display in the top of
the screen and the cursor will advance to
the next position .
To move back a character, press the Left
Arrow button .
To delete a character, press the Left Arrow
button until the character to delete is
framed . Press the Delete button .
To discard entire entry, press the back
Button .
Repeat this procedure until the desired
Patient ID is entered .
After Patient ID is entered, press the Save
button .
characTEr
DISPlayED
accEPT anD rETurn
arrOw buTTOn
lEfT
arrOw
buTTOn
NOTE:
To add a space, select the area to
the left of the letter A .
SavE
buTTOn
To stop recording, press the End Save
button .
The sEMG Data Card will record
approximately 7 minutes of sEMG data .
End Save
