Vectra Genisys® Therapy System
132
iNSTALLATiON/rEMOvAL
MOuNTiNg ThErAPY SYSTEM TO ThErAPY SYSTEM CArT
Follow the "Assembling Therapy System
Cart" instructions shipped with the Cart for
proper assembly . If the instruction sheet is
not available visit the Chattanooga website,
www .chattgroup .com, to obtain a copy of
the instruction sheet .
Therapy System Cart Assembly
Prepare Therapy System Cart
Remove all the Storage Bins from both
sides of the Therapy System Cart by pulling
each bin out and up .
rEMOvE
all bInS
Allow approximately 4 .5 in (11 .5 cm) of
the power cord extending through the
top of the cart for connecting to system .
If the system is equipped with an optional
NiMH Battery, Laser or Channel 3/4
Electrotherapy Module, it will be necessary
to allow 6 .5 in (16 .5 cm) of the Power Cord
extending through the top of the Therapy
System Cart .
4.5 In (11.5 cM)
SySTEM Only
6.5 In (16.5 cM)
SySTEM w/MODulE
Position the Therapy System onto the
Therapy System Cart with the rear of the
System over the Mains Power Cord .
Secure the System to the cart with the four
socket head screws in the Therapy System
Cart Top .
hanD TIGhTEn ThE SOckET
hEaD ScrEwS TO SEcurE
SySTEM TO carT
Mount Therapy System to Cart
NOTE:
Secure the System to the cart
by tightening the screws by hand
only . Do not use a wrench to
tighten the screws . Overtightening
may cause damage to the System
or Module housing .
