VDH Products BV
Document 063319 - version 3.12
Page:
9 of 78
After pressing the
TEMP/VENT
key once more, the average temperature is
shown in the display again.
If there is no temperature regulation, pressing the
TEMP/VENT
key has no
effect.
Press the
HUM/GAS
key. The LED above the
HUM/GAS
key starts flashing.
The upper display shows the humidity level. The lower display shows the
humidity setpoint.
After pressing the
HUM/GAS
key once more, the average temperature is
shown in the display again.
If there is no humidity regulation, pressing the
HUM/GAS
key has no effect.
Press the
PROG
key. The LED above the
PROG
key starts flashing to
indicate that this function is active.
When a program is in progress, the number of that program is shown in the
display.
By pressing the
PROG
key once more, the average temperature is shown
again in the display. The LED above the
PROG
key will extinguish.
If there is no program in progress, pressing the
PROG
key has no effect.
Press the
SENS/TIME
key. The LED above the key starts flashing to
indicate that this function is active
A flashing LED in the
SENS
row indicates which sensor is being displayed.
The sensor number is also shown in the lower display.
The sensors can be read out using the
UP
and
DOWN
keys.
All present sensors are shown, as well as the non active sensors.
After you've seen the measured values of all sensors, press the
SENS/TIME
key to stop this function and return to the normal working condition.
Press the
ZONE/HEAT
key. The LED above the key flashes to indicate this
function is active.
The upper display indicates which zones are active.
Press the
SET
key and then the
TEMP/VENT
key. The LED above the key
starts flashing indicating this function is active.
If the ripening room is ventilated, the display shows the remaining ventilation
time in minutes.
Summary of Contents for PROBA
Page 73: ...VDH Products BV Document 063319 version 3 12 Page 73 of 78...
Page 75: ...VDH Products BV Document 063319 version 3 12 Page 75 of 78...
Page 76: ...VDH Products BV Document 063319 version 3 12 Page 76 of 78...
Page 77: ...VDH Products BV Document 063319 version 3 12 Page 77 of 78 Jumper settings...