VDH Products BV
Document 063319 - version 3.12
Page:
20 of 78
Now press the
SET
key and the
STANDBY
mode is switched off. The
temperature regulation stops, the ripening room will not be kept at a constant
temperature. Also the
STANDBY
LED will not light anymore.
Rotate the key switch to the
ON
position and remove the key to prevent
unauthorized use.
2.1.9
Starting and stopping the gassing
It is possible to stop the gasification during a gassing period.
Make sure that the key switch is in the
PE
position.
Press the
SET
key and next the
HUM/GAS
key.
The upper display shows the text 'GAS'.
The lower display reads 'StoP'.
If the gasification is not to be stopped, press the
HUM/GAS
key. The
average temperature shows in the display again.
Press the
SET
key to stop the gasification period. The
GAS
LED will
extinguish to indicate that the gasification has stopped.
If ventilation is programmed, the ripening room will be ventilated.
Rotate the key switch to
ON
and remove the key. This prevents
unauthorized use.
Please note:
If a gasification is stopped, all programmed gasifications are stopped.
Should the first gasification be stopped and a second gasification
programmed, the second gasification will not take place.
During the ripening program it is possible to insert (once again) a gassing
period, if at that moment no gassing is taking place or gasification should
take place. These have to be stopped first.
Make sure the key switch is in the
PE
position.
Summary of Contents for PROBA
Page 73: ...VDH Products BV Document 063319 version 3 12 Page 73 of 78...
Page 75: ...VDH Products BV Document 063319 version 3 12 Page 75 of 78...
Page 76: ...VDH Products BV Document 063319 version 3 12 Page 76 of 78...
Page 77: ...VDH Products BV Document 063319 version 3 12 Page 77 of 78 Jumper settings...
