VCS VideoJet X.21, Manual

Page: 24 / 90

Introduction
26
VideoJet X.21/G.703
Manual
Rear Panel Connectors
On the rear panel of the unit you will find the X.21/G.703 network
interface, a terminal port for configuration and management with
the
NCTerminal
program, an I/O-port and the power connector:
(1) X.21 interface (DTE, 15-way SUB-D) for connection with
X.21 DCE
(2) Serial interface for configuration (
NCTerminal
, RS-232)
(3) Signalling input and relay output
(4) Power connector for connecting the AC plug power adapter
Fig. 2-5
VideoJet X.21
Rear Panel Connectors
The power LED on the
VideoJet X.21
is the only display that
supplies information about the connection status. But it can be
monitored with the terminal program included in the scope of sup-
ply. More detailed information is given in Chapter 5. Most of the
DCEs (data circuit-terminating equipment) of an X.21 leased line
are also equipped with a display that indicates whether data are
being transmitted through the X.21 port.
1 2 4
3