manualshive.com logo in svg

VBrick dme, Admin Manual

The VBrick DME Admin Manual is a comprehensive guide that allows users to effectively manage and operate their VBrick DME system. Available for free download on our website, this manual provides step-by-step instructions and valuable insights to optimize your video streaming experience.

Share
Download
background image

82

© Vbrick Systems, Inc.

Multi Server Max. 
Throughput

Maximum amount of bandwidth used by streaming clients within 
the Multi Protocol Server. This includes RTP/RTSP/RTMP/
RTMFP/Vbrick Multicase. This number is capped by the 
appropriate DME license, but can be set lower to limit the actual 
max bandwidth used.

Defaults (7530/7550/7570): 100Mb/500Mb/3072Mb

 

RTP Buffer Length 
(seconds)

The maximum time a packet will sit in a streaming buffer before 
being delivered to the client. This is adjusted for poor quality 
networks between client and server. Lower numbers may reduce 
playback latency. The higher number allows it to behave better 
with poor network connections.

Defaults (7530/7550/7570): 10/10/10

 

RTCP Timeout 
(seconds)

The maximum time the DME will wait for a RTP server will wait 
before timing out the connection. Setting a value of 0 means never 
timeout. This is useful if the source is not sending any RTCP 
reports. Also, when using Pause in a RTP player, this number is 
what the server will wait as a maximum before terminating the 
paused connections. Setting it to 360 will allow a maximum pause 
of 5 minutes. It also means it will wait up to 5 minutes to drop 
connections that do not terminate gracefully, including live 
content, where the stream is interrupted.

Defaults (7530/7550/7570): 15/15/15.

 

Default Authentication 
Scheme

• Basic – the DME server sends authentication credentials over 

the network in Base64 encoded text. 

• Digest – the DME server sends encrypted authentication using 

MD5 credentials over the network. 

Defaults (7530/7550/7570): digest/digest/digest

Field

Description

Summary of Contents for dme




























































































































































































































Reviews:

No comments

Related manuals for dme

Eaton Vickers M2-200 Series Overhaul Manual preview
Vickers M2-200 Series
Brand: Eaton Pages: 13
Kärcher G200FA Original Instructions Manual preview
G200FA
Brand: Kärcher Pages: 224
M.T.H. RailKing RKS SD70ACE Operator'S Manual preview
RailKing RKS SD70ACE
Brand: M.T.H. Pages: 12
Perkins 1104D Operation And Maintenance Manual preview
1104D
Brand: Perkins Pages: 112
Isuzu 4BD1 Workshop Manual preview
4BD1
Brand: Isuzu Pages: 174
Lenze MQA Series Mounting And Switch-On Instructions preview
MQA Series
Brand: Lenze Pages: 64
Nanni H4.115 Instruction Manual preview
H4.115
Brand: Nanni Pages: 32
Briggs & Stratton 40G700 Series Illustrated Parts List preview
40G700 Series
Brand: Briggs & Stratton Pages: 20
Briggs & Stratton 31P700 Series Illustrated Parts List preview
31P700 Series
Brand: Briggs & Stratton Pages: 4
Omega Engineering OMEGAFLEX FPU5-MT-110 User Manual preview
OMEGAFLEX FPU5-MT-110
Brand: Omega Engineering Pages: 83
Mercury D2.8L D-Tronic Service Manual preview
D2.8L D-Tronic
Brand: Mercury Pages: 878
Magnetic BR 100 Operation And Maintenance Manual preview
BR 100
Brand: Magnetic Pages: 24
Volvo Penta M2.04 Installation Instructions Manual preview
M2.04
Brand: Volvo Penta Pages: 8
Volvo Penta HU series Workshop Manual preview
HU series
Brand: Volvo Penta Pages: 20
Johnson Electric Nanomotion SE Series User Manual preview
Nanomotion SE Series
Brand: Johnson Electric Pages: 33
RIEJU Motor AM6 Workshop Manual preview
Motor AM6
Brand: RIEJU Pages: 37
O.S. engine GF30 Owner'S Instruction Manual preview
GF30
Brand: O.S. engine Pages: 4
Motion CM-09MC Manual preview
CM-09MC
Brand: Motion Pages: 42

Brands by name

Popular brands

Load more brands